General

Discover how Infinity Shower’s innovative recirculating system works — delivering comfort, efficiency, and a clean shower every time.

A recirculating shower is a shower system that recirculates water in a vertical pattern. The water leaves the shower head, goes down the drain, through a pump , through a series of filters, through a heater and then back out the shower head.
Less than 1 gallon of water is recirculated allowing you to enjoy an endless, hot shower, guilt-free.
Yes - our system has the capability to heat your water to well over 110 degrees. On average people find that a hot, comfortable shower temperature is between 102 - 105 degrees, some slightly warmer depending on their personal preference. You can check out our extensive temperature test to see how long the Infinity Shower stayed hot - hint: it stayed hot for over 30 minutes!
Recirculated water passes through a series of filters starting with a filter in the drain to catch large debris, a UV sterilizer that kills bacteria and a micron filter. We recommend using our Infinity Clean Cycle solution once per week.
The Infinity Shower automatically adds less than 1 gallon of water from your fresh water supply — giving you peace of mind that you’re conserving water while still enjoying a long, hot shower.
The Infinity Shower is designed and manufactured in the United States. Our headquarters is based in Atlantic Beach, Florida.
We recommend using our specific Infinity Shampoo and Body Wash when you are in recirculation mode. Developed in partnership with Stream2Sea, a company dedicated to protecting our oceans and waterways, this readily biodegradable, low-suds formula is safe for you, your Infinity Shower, and the environment. Unlike conventional soaps that can cause buildup in the filtration system, our specially formulated soap keeps your water loop clean, your skin refreshed, and our planet’s waters pristine.
Learn how conventional shampoos affect you and the environment —and why we encourage our customers to switch to a readily biodegradable alternative.
Compatible:
- Diesel-powered hydronic systems (such as Rixens, AquaHot, or Timberline)
- Standard tanked water heaters
- Propane water heaters
- Electric water heaters
- Engine heat
- Solar-heated water systems
Not Compatible:
- Tankless water heaters (electric or propane)
The Infinity Shower uses a heat exchanger inside the Core. It does not use an electric heating element. It uses heat from your onboard water heater (tanked or hydronic).
No. The recirculated water is drained after each use. Water is not shared between users or between separate showers.

Shower maintenance

The Infinity Shower is designed with simplicity in mind. With quick-access filters, straightforward cleaning steps, and durable components, keeping your system running smoothly is effortless.

Weekly
1) Clean the reusable micron filter every 5–10 showers or about once a week.
2) Add Infinty CleanCycle once per week and after every trip before storing your rig. Simply add 8 drops of Infinity CleanCycle to the shower pan while in recirculation mode and let the cleaning solution run through the system for 10 minutes, then drain.

Every 3 months
Deep clean once every 3 months or as needed: add 1/2 gallon of vinegar or 1/2 gallon of diluted bleach to the shower pan, recirculate or 2-3 minutes, drain, then recirculate with 1 gallon of water to flush and clear the system.
The Infinity CleanCycle is $32 USD. To order please visit the product page
Yes - you will need to replace the UV light bulb once per year. You can head to the product page to order.

Power Requirements /Specifications

Specs and power requirements made simple — plan your install with confidence.

The Infinity shower uses 120 watts of power. 10 amps at 12 volts. Our system is extremely energy efficient allowing you to go further and stay off-grid longer.
Our system uses less than 10 amps of power at 12 volts when in use (120 watts). Therefore you could run our system off of a single 100 amp hour battery for 10 hours.
Yes! The Infinity Shower is extremely energy efficient, because it is able to recycle thermal energy. Our system draws less than 10 amps at 12 volts when in use! A single 120 watt solar panel could power our system. (please note our system requires a heat source. We recommend using a diesel powered hydronic heating system or a tanked water heater)

Installation Requirements

Not sure where to start with installation? Our team is here to help. From answering technical questions to connecting you with a trusted installer, we make sure you have the guidance you need. Reach out for a consultation and get expert advice tailored to your build.

Compatible:
- Diesel-powered hydronic systems (such as Rixens, AquaHot, or Timberline)
- Standard tanked water heaters
- Propane water heaters
- Electric water heaters
- Engine heat
- Solar-heated water systems
Not Compatible:
- Tankless water heaters (electric or propane)
All standard shower pans are compatible with the Infinity Shower, provided they are at least 1 inch deep to allow proper collection of recirculated water.
The Infinity Shower can be installed in a Van, RV, Boat, or off-grid cabin. The Infinity Shower Core (the brains of the system) will be mounted out of sight. Depending on your rig’s layout, here are a few common places to install:

-Behind shower under sink
-Behind shower in cabinet
-Behind shower in wall
-Under bench seat

The control panel that turns the Infinity Shower on and off will be mounted inside your shower.
Our system is compatible with any shower head.
Absolutely! Our trusted network of professional van builders are ready to help with your Infinity Shower installation. Check out our list of certified installers or contact us directly and we will connect you with one of our certified installers. Already working with a builder? We’d love to connect with them and discuss how they can seamlessly integrate the Infinity Shower into your build. Reach out and a member of our team will be in touch!
We recommend working with one of our certified installers. We ask each of our customers to reach out and schedule a consultation call so we can learn more about your build layout and ensure the installation process goes smoothly for you. Contact us if you’d like to set up a consultation today!
All Core plumbing connections are 1/2" MNPT. Stainless steel MNPT threaded hoses are recommended.
10" × 13.5" × 5.25".
14.5" × 8.12"
As close to the shower as practical. Common locations include under a sink, inside a cabinet, beneath a shower pan, or in a mechanical compartment. It must remain accessible for service.
An automatic drain diverter and 3-way tee are added between the shower pan and grey tank. Some installations may require minor drain or plumbing modifications.
In ideal conditions, as little as 4 hours. Most installs are completed within one full day. Retrofits may take longer.

Wholesale Orders

We’re building a network of van builders and certified installers who share our passion for off-grid living and innovation. As a partner, you’ll get access to exclusive support, training, and wholesale opportunities — plus the chance to offer your customers a game-changing shower system that saves water without sacrificing comfort.

We offer wholesale pricing for large volume orders. Please contact our team with details about your project and the number of units you’d like.
Absolutely! Our trusted network of professional van builders are ready to help with your Infinity Shower installation. Reach out via email at jon@theinfinityshower.com and we will connect you with one of our certified installers.

Have more questions?

Didn’t find the answer you were looking for? Reach out and a member of our team will be happy to help!

Contact us